spectro-aras.com

A new version of PlotSpectra is available. There have been several small interface bug fixes and a couple of added features (see the revision motes).
There has been an important change regarding log plots. Prior to this revision data points with values <=0 were always stripped out when loading ...

Hi Christian,

My collimator is 100mm but the main difference is that my echelle is not fiber fed. I use a short 75 um long slit.
The width of the lines is set by the seeing and is roughly Gaussian with a typical FWHM of 7 to 8 pixels (1x1 binning). So not very different from eShel.

I have been ...

After reading Christians excellent article on echelle optimization I started to use 3x3 median filtering in my data reduction pipeline as I am using an ASI1600m cmos sensor on my echelle.

However, I think I have uncovered a problem with median filtering that may be quite general and not just ...

Hi Peter

I think the problem is that I had not set up the 32bit install project correctly.
I found setting up the install project a bit confusing and it may still be wrong for a 32 bit cpu as I don't have a 32 bit machine to test on .
Re-download the install files and try the 32 bit installer now ...

Here is V357 Lac for Sept 13th. R = 14000 and I estimate the S/N to vary between about 80 to 120 over the range.
Tim

My spectrum from a little later the same night.
Tim

My result for Aug 17. A difficult target for Echelle spectroscopy and conditions were not ideal - very high humidity and haze.
Tim

My latest high resolution spectrum for RS Oph.
Region around Halpha compared to my last two spectra in 2016 and 2015.
Tim

Hi all,

I have just noticed that when processing echelle spectra ISIS does not auto fill the header information for GEO_LONG, GEO_LAT and GEO_ELEV.
I am using version 5.9.3c.
I have not checked whether it does so for normal spectra, but I know it did several versions back.

Tim

Here is my try at V1413 Aql with echelle spectroscopy. Difficult as the current V Mag is approx. 12.5 to 13 according to AAVSO.
Tim