Design, construction, tuning of spectroscopes
Information and discussion about softwares (telescope remote, autoguiding, acquisition, spectral processing ...)
Robin Leadbeater
Posts: 1952 Joined: Mon Sep 26, 2011 4:41 pm
Contact:
Post
by Robin Leadbeater » Wed Apr 28, 2021 10:18 pm
Sebastien Berriot wrote: Robin,
Do you have a exemple of spectre with this configuration (APN) ?
thank you
Sébastien
Sorry no. I only used this configuration with a DSLR once once to see if it would work. Spectroscopy is much easier with a mono astro camera
Cheers
Robin
Sebastien Berriot
Posts: 52 Joined: Fri Aug 19, 2016 7:02 pm
Post
by Sebastien Berriot » Fri Apr 30, 2021 3:39 pm
Hello Robin,
I also have an Atik314+ but i don't have an adapter to connect the camera to the objectif photo 50 mm.
what's your adapter ?
Robin Leadbeater
Posts: 1952 Joined: Mon Sep 26, 2011 4:41 pm
Contact:
Post
by Robin Leadbeater » Fri Apr 30, 2021 4:43 pm
Sebastien Berriot wrote:
what's your adapter ?
I used many adapters from my junk box screwed together together to convert an Olympus lens to T2.
junk_box_spectrograph_adpaters.png (498.43 KiB) Viewed 4763 times
You can do it much easier though using this adapter
https://www.teleskop-express.de/shop/pr ... ength.html
plus an adapter of the right length to reduce to 42mm from the list there
Cheers
Robin
Robin Leadbeater
Posts: 1952 Joined: Mon Sep 26, 2011 4:41 pm
Contact:
Post
by Robin Leadbeater » Thu May 06, 2021 10:55 pm
Sebastien Berriot wrote: Hello robin,
what is the adapter of the right length to reduce to 42mm ?
I do not know but you can calculate it (camera lens to M48 + M48 to T2 + atk 314 back focus = back focus of the camera lens) or you can ask Teleskop Service