Hello,
Very similar configuration when traveling: Televue 85mm on a NEQ6 Pro mount with LISA spectrograph. Here is a detailed description of the equipment & software:
* Windows 7 (64bits) computer with ASCOM 6.1 platform and AudeLA 2012.3.12 (two instances run: A1 and A2)
* Mount: NEQ6 Pro with EQ Direct cable controled through EQMOD.Telescope:
-Joystick to move the telescope manually
-Carte du Ciel 3.4.1 for GoTo & star Synchronization (pointing model)
-AudeLA "Autoguiding" module for autoguiding [instance A1]
* electronic Finder:
-75mm F/2 C-mount lens on a Watec 120N+ video camera in parallel to the Televue 85 (alignment made with the mounting ring on a fixed lamp).
-USB2 grabber to digitize the video image on the computer
-AudeLA "Telescope" module to display the image with a cross hair [instance A1]
* Televue85 Optical Tube Assembly with LISA spectrograph:
-Atik Titan guiding camera controled through Atik drivers, ASCOM drivers and then AudeLA "Autoguiding" module [instance A1]
-Atik 314L+ spectra acquisition camera controled through Atik drivers, ASCOM drivers and then AudeLA "Acquisition" module [instance A2]

- NEQ6 Pro + TV85 + LISA + Atik
- IMG_4277 TV85-LISA-Atik.JPG (205.16 KiB) Viewed 12353 times
I tried a single instance but it was unstable (AudeLA crash) so I switched to two instances of the same software and it seemed to work very well.
General process was:
-switch ON and connect all equipment; set CCD temperature to desired set point (-10°C for exemple)
-"Acquisition" of CCD bias, dark frames (10min) and flat (lot of them) calibration frames with telescope cover on
-GoTo target (Carte du Ciel)
-Center with "Telescope"
-Center on the slit
-Synchronize target on the pointing model (Carte du Ciel)
-Set "Autoguiding" with Tracking ON
-"Acquisition" of a 'one image' short exposure, define an exposure time and number of exposure for spectra
-Run "Acquisition" 'serie'
-Switch "Autoguiding" OFF at the end
-"Acquisition" of neon calibration frames
The good news is that it working very well with AudeLA 2012.03.12 version and ASCOM platform. It is very easy to Go To a target with Carte du Ciel et center the target with the electronic finder. Then standard acquisition with autoguiding during exposure.
I started this setup at OHP local astronomy (CALA) camp...
First night was a test night and I had lot of issues initially with a single AudeLA instance. I also decided to install the electronic finder which helped a lot!
CCD dark frames took long time to acquire. I decided to use 10min maximum exposure time but maybe I should go longer (20min?).
First night targets were: Arcturus, sigma Her (B9V reference star), M57 and beta Lyrae.
Second night with more stars (classification), M1, NGC3628 (to be processed), NGC2392...
Here is the spectrum of M1:

- Spectrum of Messier 1
In summary: excellent 'light' configuration when traveling with some limitation on the magnitude reached out...
More image from the CALA camp at OHP and other's spectra at:
http://photos.cala.asso.fr/thumbnails.php?album=45
Cordialement,
Olivier