spectro-aras.com

Hi! I hoped to use AudeLA for acquisition but I don't manage to get past a simple problem - I get an error message when I press the Setup button in Camera Setup/ASCOM dialogue box:

setupDialog error CreateInstance hr=80004002
setupDialog error CreateInstance hr=80004002
while executing
"ascomcam setup $private($camItem,modele)"
(procedure "::ascomcam::configureDriver" line 11)
invoked from within
"::ascomcam::configureDriver "
invoked from within
".audace.confCam.usr.onglet.fascomcam.frame1.frame3.configure invoke"
("uplevel" body line 1)
invoked from within
"uplevel #0 [list $w invoke]"
(procedure "tk::ButtonUp" line 24)
invoked from within
"tk::ButtonUp .audace.confCam.usr.onglet.fascomcam.frame1.frame3.configure"
(command bound to event)

All other SW works OK, I can use the ATIK cameras in Artemis, ASCOM self-diagnoses fine and works well with CdC and EQMOD.

Any ideas what I could try?

Cheers, David

David,
One of the most comprehensive explanations of installing ATiK cameras under Audela is contained in the LISA manual......
http://thizy.free.fr/shelyak/Lisa/DC001 ... -%20En.pdf

Thanks Ken, thats what I did. I've tried to un-install and instal as well. Now I'll try another laptop... /Cheers, David

David,


Which version of AudeLA are your using?

I personally use an old but working version with Atik camera (through ASCOM, version SP1): 20120312

You can get it on Source Forge here: http://sourceforge.net/projects/audela/ ... e/download

Work well with Atik Titan, Atik 314L+ or Atik 460EX cameras...


Cordialement,
Olivier Thizy
Vous ne verrez plus des étoiles comme avant !
http://www.shelyak.com/en/