I have uploaded my latest version of PlotSpectra to my OneDrive folder here: https://1drv.ms/f/s!AvXqhKI5kEGRjEhdaQ6jaj8AHx_L
The new version has the following added features and fixes a few minor bugs.
On the Line stats dialog:
- added polynomial continuum fitting (up to order 4).
- added box for normalized rms fitting error.
- added buttons for saving and re-loading the defined continuum fitting regions
and the fitting parameters.
- added a button at bottom of dialog to output a csv file that lists all the line stats plus
x y data for the region displayed including:
original dat
continuum
data normalized to continuum
fitted regions
measured regions.
On the Main plot setup dialog:
- added ability to set a single custom color for stacked charts.
- added setting for a positive or negative vertical label offset.
On the Velocity plot setup dialog:
- added ability to set custom line colors for multi region plots.
Tim
New PlotSpectra version 1.5.1
-
- Posts: 168
- Joined: Fri Apr 04, 2014 6:31 pm
- Location: Arnprior Ontario
-
- Posts: 101
- Joined: Tue Jun 24, 2014 5:08 pm
- Location: Perth, Western Australia
Re: New PlotSpectra version 1.5.1
Very nice Tim - thanks.
Paul
Paul
-
- Posts: 1523
- Joined: Fri Sep 23, 2011 1:01 pm
- Location: Rouen
- Contact:
Re: New PlotSpectra version 1.5.1
Thank you for these improvments, Tim
A very efficient tool, easy to use
François
A very efficient tool, easy to use
François
François Teyssier
http://www.astronomie-amateur.fr
http://www.astronomie-amateur.fr
-
- Posts: 148
- Joined: Mon Jul 10, 2017 10:25 pm
Re: New PlotSpectra version 1.5.1
Bonjour Tim
si j'ouvre le profil brut généré par Isis, tout se passe bien
![Image](http://ciel.gg.blog.free.fr/public/2017/spectro/plotspectra1.jpg)
mais si, après avoir fait (toujours avec Isis) la réponse instrumentale et les autres réglages, je sauvegarde cette version, je ne peux pas l'ouvrir avec PlotSpectra
![Image](http://ciel.gg.blog.free.fr/public/2017/spectro/plotspectra2.jpg)
![Image](http://ciel.gg.blog.free.fr/public/2017/spectro/plotspectra3.jpg)
Google:
Hello Tim
if I open the raw profile generated by Isis, everything goes well
but if, after doing (always with Isis) the instrumental response and the other settings, I save this version, I can not open it with PlotSpectra
si j'ouvre le profil brut généré par Isis, tout se passe bien
![Image](http://ciel.gg.blog.free.fr/public/2017/spectro/plotspectra1.jpg)
mais si, après avoir fait (toujours avec Isis) la réponse instrumentale et les autres réglages, je sauvegarde cette version, je ne peux pas l'ouvrir avec PlotSpectra
![Image](http://ciel.gg.blog.free.fr/public/2017/spectro/plotspectra2.jpg)
![Image](http://ciel.gg.blog.free.fr/public/2017/spectro/plotspectra3.jpg)
Google:
Hello Tim
if I open the raw profile generated by Isis, everything goes well
but if, after doing (always with Isis) the instrumental response and the other settings, I save this version, I can not open it with PlotSpectra
Star Analyser 100; Atik 383L; T200/1000
-
- Posts: 19
- Joined: Sun Jan 26, 2014 8:04 am
- Location: St. Martin d'Uriage
- Contact:
Re: New PlotSpectra version 1.5.1
Hi Tim,
today I discovered PlotSpectra: Thank you for this wonderful software: Excellent!
One remark: I cannot read the text files: When I try to open them, ISIS is opened instead.
have a nice day
Tony Heidemann
today I discovered PlotSpectra: Thank you for this wonderful software: Excellent!
One remark: I cannot read the text files: When I try to open them, ISIS is opened instead.
have a nice day
Tony Heidemann
-
- Posts: 168
- Joined: Fri Apr 04, 2014 6:31 pm
- Location: Arnprior Ontario
Re: New PlotSpectra version 1.5.1
Tony - Very strange. I downloaded the PlotSpectra folder and have no trouble with the text files. I just double click and they open in notepad. Perhaps you could right click on the text files and choose: open with - notepad.
Gerard - I can not re-create your problem. I have tried applying various ISIS functions to some of my spectra and then re-saved them as .fit files and have no problem opening them in PlotSpectra. When you re-open in ISIS your spectra that have been corrected for response, what is shown in the boxes for DATE-OBS and CUNIT1 when you view the header?
Could you send me an example of your raw and adjusted spectra and a list of the operations you performed in ISIS and I will investigate further (t2lester@gmail.com)
OK - I just thought about this a bit more and think I might know what happened. If some of your manipulation with ISIS involved saving as a .dat file then all the header information would be lost even if the final result was saved as a .fit file. PlotSpectra needs this header information.
Tim
Gerard - I can not re-create your problem. I have tried applying various ISIS functions to some of my spectra and then re-saved them as .fit files and have no problem opening them in PlotSpectra. When you re-open in ISIS your spectra that have been corrected for response, what is shown in the boxes for DATE-OBS and CUNIT1 when you view the header?
Could you send me an example of your raw and adjusted spectra and a list of the operations you performed in ISIS and I will investigate further (t2lester@gmail.com)
OK - I just thought about this a bit more and think I might know what happened. If some of your manipulation with ISIS involved saving as a .dat file then all the header information would be lost even if the final result was saved as a .fit file. PlotSpectra needs this header information.
Tim
-
- Posts: 19
- Joined: Sun Jan 26, 2014 8:04 am
- Location: St. Martin d'Uriage
- Contact:
Re: New PlotSpectra version 1.5.1
Hi Tim,
The right-click works!
Thank you
Tony
The right-click works!
Thank you
Tony
-
- Posts: 148
- Joined: Mon Jul 10, 2017 10:25 pm
Re: New PlotSpectra version 1.5.1
Bonsoir Tim
j'ai compris
Good evening Tim
I understood
![Image](http://ciel.gg.blog.free.fr/public/2017/spectro/plotspectra4.jpg)
en utilisant le bouton construire:
using the build button:
![Image](http://ciel.gg.blog.free.fr/public/2017/spectro/plotspectra6.jpg)
l’entête est correctement remplie
the header is correctly filled
![Image](http://ciel.gg.blog.free.fr/public/2017/spectro/plotspectra5.jpg)
désolé pour le dérangement![Smile :)](./images/smilies/icon_e_smile.gif)
Sorry for the inconvenience![Smile :)](./images/smilies/icon_e_smile.gif)
j'ai compris
Good evening Tim
I understood
![Image](http://ciel.gg.blog.free.fr/public/2017/spectro/plotspectra4.jpg)
en utilisant le bouton construire:
using the build button:
![Image](http://ciel.gg.blog.free.fr/public/2017/spectro/plotspectra6.jpg)
l’entête est correctement remplie
the header is correctly filled
![Image](http://ciel.gg.blog.free.fr/public/2017/spectro/plotspectra5.jpg)
désolé pour le dérangement
![Smile :)](./images/smilies/icon_e_smile.gif)
Sorry for the inconvenience
![Smile :)](./images/smilies/icon_e_smile.gif)
Star Analyser 100; Atik 383L; T200/1000
-
- Posts: 1936
- Joined: Mon Sep 26, 2011 4:41 pm
- Contact:
Re: New PlotSpectra version 1.5.1
Hi Tim,
Have you considered adding an SNR measurement to PlotSpectra ? Perhaps along the lines we discussed a while back
http://www.spectro-aras.com/forum/viewt ... 977&p=4477
Cheers
Robin
Have you considered adding an SNR measurement to PlotSpectra ? Perhaps along the lines we discussed a while back
http://www.spectro-aras.com/forum/viewt ... 977&p=4477
Cheers
Robin
LHIRES III #29 ATIK314 ALPY 600/200 ATIK428 Star Analyser 100/200 C11 EQ6
http://www.threehillsobservatory.co.uk
http://www.threehillsobservatory.co.uk